Related Topics:
Capacitor Bank Improvement-
Reactor and capacitor bank
Having above information, it is possible to find fitting cubicle for the elements of the capacitor bank. Because the device is going to operate at the mains, where higher order harmonics are present, power capacitors must be protected by reactors. Each capacitor emits additional amount of heat as well as a reactor. The. The arrangement of the elements inside the enclosure should be easily available for maintenance and replacement, and each element should be clearly marked according to the technical. The next step is to chose appropriate power capacitors. It means, that one needs to pay attention to its rated voltage and power. Since the capacitors will be working in series with. The short circuit protection of the capacitors is provided by the switch disconnectors. For the capacitors the fuse link rated current should. The last step is to select the protection of the capacitors as well as the contactors. In order to do so, one has to skim the catalogue cards of the.
[PDF Version]
-
Capacitor bank rated voltage specifications
A capacitor unit is normally designed for single phase. The capacitor should be capable of smooth operation upto 110% of rated peak phase voltage of the system and also it should be capable of operation 120. Capacitor unit are normally rated with its KVAR ratings. Standard capacitor unit available at. These are mainly two cause of farming heat on a capacitor bank. 1. Outdoor type capacitor bank are generally installed at open space where sunlight strikes on the capacitor unit dir. To ensure proper ventilation, there should be adequate spacing between capacitor units. Sometimes, forced airflow can be used to speed up heat dissipation from the bank.
FAQs about Capacitor bank rated voltage specifications
What is the voltage tolerance of a capacitor bank?
System Voltage Tolerance: Capacitor banks must operate smoothly at up to 110% of the rated peak phase voltage and 120% of the rated RMS phase voltage. KVAR Rating: Capacitor units are rated by their KVAR values, which determine the reactive power they can provide to the system.
What is a capacitor bank?
Capacitor Bank Definition: A capacitor bank is defined as a group of capacitors used to store and release electrical energy in a power system, helping to improve power quality. System Voltage Tolerance: Capacitor banks must operate smoothly at up to 110% of the rated peak phase voltage and 120% of the rated RMS phase voltage.
What are the limits of a capacitor bank?
A capacitor bank should continue its service with in the following limits. 110 % of normal system peak voltage. 120 % of normal system rms voltage. 135 % of rated KVAR. 180 % of normal rated rms current. A capacitor unit is normally designed for single phase.
What is the rated voltage of a capacitor bank?
APACITOR BANKS1. RATED VOLTAGE:The rated voltage of the capacitors shall be 12 KV2.0 ATED UTPUT:The standard ra ed output of a switched capacitor bank shall be 150 KVAR at 12KV rated voltage. 3.0. PERMISSIBLE OVERLOADS:The maximum oads with regard to voltage, current and reactive output shall conform to IS: 13925 (Part-1).4.
What is the maximum voltage rating for a capacitor?
IEEE 18 specifies certain physical dimensions for capacitor units, such as spacing between bushings and the mounting hole spacing. The spacing between bushings determines the maximum unit voltage rating, which is typically 20kV for two bushing units and 25kV for single bushing units.
What are the characteristics of a capacitor unit?
A capacitor unit is normally designed for single phase. The capacitor should be capable of smooth operation upto 110% of rated peak phase voltage of the system and also it should be capable of operation 120% of rated rms phase voltage that means, 120% of times of peak phase voltage. Capacitor unit are normally rated with its KVAR ratings.
-
Capacitor bank as shown
The capacitor bank is classified as: 1. Externally Fused –For this type of connection, each fuse unit is connected externally to the capacitor bank. This helps to save the capacitor bank from faults like surge voltage, temperature, etc. without any interruption in the operation. 2. Internally Fused –In this type, the fuse. The calculation is an important feature that needs to be considered while designing a substation or residential community. The steps involved in the. As we have seen that one major role of this is to improve the power factor. For this application, these banks are installed in substations. A number of capacitors are connected in series to. The wiring diagram of the three-phase capacitor bank is shown below. As shown in the above figure, 2 capacitor banks have been connected to the grid. All these are connected in delta. In the delta, the line voltage is equal to the. We have seen that a capacitor bank is used for the improvement of power factor and reactive power compensation in a substation. As the role of this bank is very important, it becomes.
[PDF Version]
FAQs about Capacitor bank as shown
What is a capacitor bank?
When a number of capacitors are connected together it forms a capacitor bank. They can be connected in series or parallel. A capacitor bank has numerous advantages and applications. Most of the time, these are used for reactive power compensation and power factor improvement. The arrangement of these can be done at substation or power plants.
What is the purpose of capacitor bank calculator?
The main purpose of the capacitor bank calculator is to get the necessary kVAR for enhancing power factor (pf) from low range to high. For that, the required values are; current power factor, real power & the value of power factor to be enhanced over the system. So that we can calculate to get the value in kVAR.
Where are capacitor banks located?
In which capacitor banks are located at the origin or at the centre of the system. This allows a remarkable reduction in total power of the installed capacitors. The capacitor banks must be installed with a switching device, as keeping capacitor banks connected permanently to the system is not good choice. 4. Combined power factor correction
What are the applications of capacitor banks?
The applications of capacitor banks include the following. Capacitor banks are mainly used to enhance the electrical supply quality & also to enhance the power systems efficiency. This is most frequently used for the correction of AC power supply in industries where electric motors and transformers are used.
Why do we use a common capacitor bank for power factor correction?
This method is generally used for the loads which have similar functioning. A common capacitor bank is provided to improve the power factor, as shown in figure. So, for instance, if you have 3 similar induction motors which is being used for a same reason, you can use a common capacitor bank for power factor correction.
Why are capacitors connected in series?
When a number of capacitors are connected together in series or parallel, forms a capacitor bank. These are used for reactive power compensation. Connecting the capacitor bank to the grid improves reactive power and hence the power factor. As shown in the figure, capacitors are connected in series to improve the power factor rating.
-
Capacitor leads have colors on the positive and negative poles
Polarization: Some (but not all) capacitors have a positive and negative lead. If so, the polarization marking indicates the negative side, and generally takes the form of a lightly colored stripe.
FAQs about Capacitor leads have colors on the positive and negative poles
Do capacitors have a positive and negative polarity?
Capacitors, especially electrolytic ones, have a positive and negative terminal. It's crucial to connect them correctly to avoid damage. Incorrect polarity can lead to the capacitor overheating, leaking, or even exploding. The longer lead is usually positive. Always refer to the datasheet or circuit diagram for specific polarity markings.
How do you identify a capacitor polarity?
Here are some common ways to identify capacitor polarity: 1. Plus (+) and Minus (-) Signs: The most straightforward method, where a “+” sign indicates the positive terminal and a “-” sign indicates the negative terminal. 2. Colored Bands or Stripes: Some capacitors use color coding to denote polarity.
What happens if you reverse polarity of a capacitor?
Reversing the polarity can lead to damage or even explosion. The positive terminal is usually marked with a “+” symbol or a longer lead. Tantalum Capacitors: Similar to electrolytic capacitors, tantalum capacitors are polarized and have a positive and negative terminal.
How do you know if a capacitor is positive or negative?
The longer lead is the positive terminal, while the shorter lead is negative. The grey-colored area on the casing corresponds to the negative lead, with the opposite end being positive.If the capacitor is packaged, the positive terminal is usually marked with a “+” symbol, or the negative terminal is indicated by a colored area.
How to read PCB capacitor polarity markings?
Here's how to read PCB capacitor polarity markings: Check for the “+” and “-“ symbols next to the capacitor pads. These markings directly indicate where to place the positive and negative leads of the capacitor. For many polarized capacitors, the negative pad is usually smaller than the positive pad.
What is the polarity of a through-hole electrolytic capacitor?
Distinguishing the polarity of through-hole electrolytic capacitorsThe polarity of through-hole electrolytic capacitors can be identified by the length of the leads and the color of the casing. The longer lead is the positive terminal, while the shorter lead is negative.
-
The role of capacitor
Both capacitors and batteries store electrical energy, but they do so in fundamentally different ways:Capacitors store energy in an electric field and release energy very quickly. They are useful in applications requiring rapid charge and discharge cycles.
FAQs about The role of capacitor
What role do capacitors play in electrical circuits?
Capacitors are essential components in electrical and electronic circuits. They are passive devices that store and release electrical energy by accumulating charge on two conductive plates separated by an insulating material called a dielectric. This article will explore the vital roles that capacitors play in electric circuits.
Why do we need a capacitor?
Capacitors can help stabilize voltage and current levels in a circuit. They can store and release energy quickly, making them ideal for maintaining stable voltage levels in power supply circuits or buffering current spikes in high-speed digital circuits.
What is a capacitor in Electrical Engineering?
In electrical engineering, a capacitor is a device that stores electrical energy by accumulating electric charges on two closely spaced surfaces that are insulated from each other. The capacitor was originally known as the condenser, a term still encountered in a few compound names, such as the condenser microphone.
How do capacitors work?
Capacitors are connected in parallel with the power circuits of most electronic devices and larger systems (such as factories) to shunt away and conceal current fluctuations from the primary power source to provide a "clean" power supply for signal or control circuits.
Why are capacitors used in power supply circuits?
In power supply circuits, capacitors are often employed to smooth out voltage fluctuations and reduce noise by filtering out high-frequency components. Additionally, capacitors can be used as decoupling devices in electronic circuits, isolating different sections of a circuit to prevent interference and improve performance.
How does a capacitor store electrical energy?
When a voltage is applied across the plates, an electric field is created, causing electrons to accumulate on one plate while the other plate develops a positive charge. This process allows the capacitor to store electrical energy in the form of an electrostatic field.
-
Capacitor differential protection tips
This overcurrent relay detects an asymmetry in the capacitor bankcaused by blown internal fuses, short-circuits across bushings, or between capacitor units and the racks in which they are mounted. Each capacitor unit consist of a number of elements protected by internal fuses. Faulty elements in a capacitor unit are. Capacitors of today have very small losses and are therefore not subject to overload due to heating caused by overcurrent in the circuit. The capacitor can withstand 110% of rated voltage. In addition to the relay functions described above the capacitor banks needs to be protected against short circuits and earth faults. This is done with an.
FAQs about Capacitor differential protection tips
What are the different types of protection arrangements for capacitor bank?
There are mainly three types of protection arrangements for capacitor bank. Element Fuse. Bank Protection. Manufacturers usually include built-in fuses in each capacitor element. If a fault occurs in an element, it is automatically disconnected from the rest of the unit. The unit can still function, but with reduced output.
What is capacitor bank protection?
Capacitor Bank Protection Definition: Protecting capacitor banks involves preventing internal and external faults to maintain functionality and safety. Types of Protection: There are three main protection types: Element Fuse, Unit Fuse, and Bank Protection, each serving different purposes.
Is there a one-size-fits-all solution to capacitor bank protection?
CONCLUSION The many variations in capacitor bank design mean there is no one-size-fits-all solution to bank protection. The basic concepts of short-circuit protection and element failure detection remain unchanged, regardless of bank design. We recognize that different protection types are useful for different conditions.
What are the different types of capacitor protection?
Types of Protection: There are three main protection types: Element Fuse, Unit Fuse, and Bank Protection, each serving different purposes. Element Fuse Protection: Built-in fuses in capacitor elements protect from internal faults, ensuring the unit continues to work with lower output.
Can a single-capacitor energise a capacitor bank?
This work introduces a differential protection method for early detection of a fault in a single-capacitor into a capacitor bank configuration. This protection has the aim to discriminate between internal faults from transient conditions such as capacitor bank energisation.
How does a capacitor unbalance protection work?
The unbalance protection should coordinate with the individual capacitor unit fuses so that the fuses operate to isolate the faulty capacitor unit before the protection trips the whole bank. The alarm level is selected according to the first blown fuse giving an early warning of a potential bank failure.
-
What is the capacity of the capacitor to discharge
The Capacitor Discharge Equation is an equation which calculates the voltage which a capacitor discharges to after a certain time period has elapsed. Below is the Capacitor Discharge. Taken into account the above equation for capacitor discharge and its accompanying circuit, the variables which make up the equation are explained below: 1. VC- VCis the voltage that is across the capacitor after a certain time period has elapsed. 2. V0- V0is the initial voltage. The Capacitor Discharging Graph is the a graph that shows how many time constants it takes for a capacitor to dischargeto a given.
FAQs about What is the capacity of the capacitor to discharge
What is a capacitor discharge graph?
Capacitor Discharge Graph: The capacitor discharge graph shows the exponential decay of voltage and current over time, eventually reaching zero. What is Discharging a Capacitor? Discharging a capacitor means releasing the stored electrical charge. Let's look at an example of how a capacitor discharges.
How much voltage does a capacitor discharge?
After 2 time constants, the capacitor discharges 86.3% of the supply voltage. After 3 time constants, the capacitor discharges 94.93% of the supply voltage. After 4 time constants, a capacitor discharges 98.12% of the supply voltage. After 5 time constants, the capacitor discharges 99.3% of the supply voltage.
How does capacitance affect the discharge process?
C affects the discharging process in that the greater the capacitance, the more charge a capacitor can hold, thus, the longer it takes to discharge, which leads to a greater voltage, V C. Conversely, a smaller capacitance value leads to a quicker discharge, since the capacitor can't hold as much charge, and thus, the lower V C at the end.
How does a capacitor discharge?
Discharging a capacitor means releasing the stored electrical charge. Let's look at an example of how a capacitor discharges. We connect a charged capacitor with a capacitance of C farads in series with a resistor of resistance R ohms. We then short-circuit this series combination by closing the switch.
Can a capacitor charge if voltage x y?
Capacitors oppose changes of voltage. If you have a positive voltage X across the plates, and apply voltage Y: the capacitor will charge if Y > X and discharge if X > Y. calculate a capacitance value to discharge with certain voltage and current values over a specific amount of time
What is a capacitor discharging cycle?
The Capacitor discharging cycle that a capacitor goes through is the cycle, or period of time, it takes for a capacitor to discharge of its charge and voltage. In this article, we will go over this capacitor discharging cycle, including:
-
Which capacitor manufacturer is the best in Benin
A is a passive device on a circuit board that stores electrical energy in an electric field by virtue of accumulating electric charges on two close surfaces insulated from each other. This is a list of known manufacturers, their headquarters country of origin, and year founded. The oldest capacitor companies were founded over 100 years ago. Most older companies were founded during the era, which includes the era and post war era. As the de.
-
What is a safety certified capacitor
Designed for surge and impulse protection, safety certified capacitors shunt impulse energy to ground and protect the circuit and user from high voltage surges.
FAQs about What is a safety certified capacitor
What is a Certified Safety capacitor?
Certified Safety Capacitors are vital components for safety critical across-the-line and line-to-chassis applications. X-class capacitors are used across the line where failure would not lead to an electrical shock. X-class capacitors are divided into sub-classes by its rated and pulse voltage. See Table 1. Table 1.
What are X-class safety capacitors?
X-class safety capacitors classification Y-class capacitors are used in “line-to-ground” applications where failure could lead to an electrical shock. It is also divided into sub-classes by their AC voltage and peak surge voltage ratings. See Table 2.
What does a safety capacitor do?
The function of these capacitors is to protect against surges and transients, as well as providing EMI filtering. Safety capacitors are circuit-specific and serve to protect the circuit and the user from high-voltage surges by shunting the impulse energy to ground. One common cause of such surges is lightning strikes.
What type of safety capacitor should I use?
Subclass X2 and Y2 are the most common type of subclass for applications that use 120VAC (USA) or 220/240VAC (Europe). X/Y combination capacitors are also available, so you might consider using one of these, as well. Whichever safety capacitor you choose, make sure that it has all the proper safety-approval logo markings.
Are Y capacitors safe?
According to the safety level, Y capacitors are divided into 4 categories: Y capacitors are mostly orange or blue and are generally marked with safety certification (such as UL, CSA, etc.) and withstand voltage AC250V or AC275V. However, from the above table, its actual DC withstand voltage is 5000V (Y2) or more.
What type of capacitor should be used?
The most ideal capacitor is an oil-filled iron-case capacitor. (3) Safety capacitors can not be used for high power. (4) The safety capacitor step-down is not suitable for dynamic load. (5) When DC is required, half-wave rectification should be used to meet the constant load. Bridge rectification is not recommended. Recommended Article:
-
Why do we need to replace the capacitor
Capacitors need to be replaced when they show signs of starting to fail. If they are allowed to completely fail, there is a strong probability that additional, more expensive system damage can occur.
FAQs about Why do we need to replace the capacitor
Why do you need a capacitor?
Capacitors store energy in an electric field. They let it go when they need to so your circuit works right. That's why you need them to smooth out power, filter out noise, and give you a little extra energy when you need it. For example, capacitors are critical in power supply circuits. They store energy and help regulate the voltage.
Do capacitors need to be replaced?
In the realm of electronics, capacitors play a vital role in storing and releasing electrical energy. However, over time, these components may degrade or fail, necessitating replacement. Fear not, for this guide is your beacon through the process of capacitor replacement.
How do capacitors improve motor efficiency?
Improved Efficiency: Capacitors help improve the efficiency of single-phase motors by reducing power factor losses. By correcting the phase angle between the current and voltage, capacitors ensure that the motor operates at its optimal efficiency, thereby reducing energy consumption and lowering operating costs.
Why does a motor need a capacitor?
A capacitor is required for a single-phase motor to provide the necessary phase shift to start the motor and to improve its running efficiency. In a 1-phase motor, the starting torque is essential to overcome the initial inertia and bring the motor to its operating speed.
How to replace a capacitor in a circuit board?
The old soldering joint will securely hold the newly replaced capacitor and help it function accurately. You have to perform the soldering task on the other side of the circuit board too. Finally, mount the circuit board into the device casing properly to finish off the capacitor replacement task.
Can capacitors replace batteries?
While capacitors have their strengths, they are not a direct replacement for batteries in most applications. However, they can complement batteries in hybrid systems, improving overall performance and efficiency. As technology advances, we may see further developments in capacitor technology that could bridge the gap between the two.
-
Polyaniline as capacitor material
Self-assembly, faster ion transport, high durability, increased retention rate, exquisite specific capacitance are some key characteristics of polyaniline based supercapacitors.
FAQs about Polyaniline as capacitor material
Can polyaniline be used as a supercapacitor?
Polyaniline (PANi) as one kind of conducting polymers has been playing a great role in the energy storage and conversion devices besides carbonaceous materials and metallic compounds. Due to high specific capacitance, high flexibility and low cost, PANi has shown great potential in supercapacitor. It alone can be used in fabricating an electrode.
What is the capacitance of polyaniline (PANI)?
Polyaniline (PANI) as a pseudocapacitive material has very high theoretical capacitance of 2000 F g –1. However, its practical capacitance has been limited by low electrochemical surface area (ESA) and unfavorable wettability toward aqueous electrolytes.
Is modified polyaniline a promising material as a capacitor?
Our experimental results were further supported by first-principles density functional theory calculations and demonstrate that modified polyaniline is a promising material as a capacitor.
Why does polyaniline lose capacitance after 1000 cycles?
PANI tend to degrade and undergoes volumetric instability during repeated charge/discharge cycling which lead to fast decline in the capacitance of polyaniline. Apparently supercapacitor electrode made of pure PANI tend to loose over 50 % of their capacitance after 1000 cycles .
Is polyaniline a conducting polymer?
Polyaniline, as conducting polymer, particularly in nano-morphology, has been one of the pioneer electroactive materials paving the corridor for commercial development of pseudocapacitors.
Why is polyaniline a good conductor for energy storage?
They have distinctive features, which includes rapid charging and discharging capabilities, exceptional energy and power densities, and prolonged stability. Polyaniline is one of the most studied conducting polymers for energy storage application because of its high capacity and electrochemical properties but poor cyclability.
-
Which capacitor manufacturer in Tbilisi is the best
A capacitor is a passive device on a circuit board that stores electrical energy in an electric field by virtue of accumulating electric charges on two close surfaces insulated from each other. This is a list of known capacitor manufacturers, their headquarters country of origin, and year founded. The oldest capacitor companies. • - United States - founded in 1972. • - United States• - Germany• (ECC) - Japan• - Japan - founded in 1937. • - United States - founded in 1919.• - Japan - founded in 1940. • - United States - Dubilier founded in 1920. • General Atomics Electromagnetic Systems (GA-EMS) - United States • - Japan • - China• - Japan - founded in 1944.
FAQs about Which capacitor manufacturer in Tbilisi is the best
Who is the best capacitor manufacturer in the world?
With a market share of approximately 25%, Manufacturer A is one of the top players in the capacitor market. They have a strong presence in both developed and emerging markets, and their products are known for their high quality and reliability. Manufacturer B is another top capacitor manufacturer that has been in the industry for over 70 years.
What makes manufacturer G A good capacitor?
Manufacturer G has been a leader in the industry for years and has continued to innovate with their latest line of capacitors. Their newest product features a high energy density, which allows for a smaller form factor without sacrificing performance.
Which manufacturers offer high-quality capacitors?
Here are three top manufacturers that offer high-quality capacitors: Manufacturer D is a well-known brand that produces capacitors with exceptional quality. Their products are reliable and durable, making them ideal for various applications.
What is manufacturer a capacitor?
Manufacturer A is a leading capacitor manufacturer that has been in the industry for over 50 years. They offer a wide range of capacitors, including ceramic, tantalum, and aluminum electrolytic capacitors. Their products are used in various industries, such as automotive, telecommunications, and consumer electronics.
Who makes optimal power capacitors?
CDE, founded in Liberty, SC in 1909 is a manufacturer of optimal power capacitors. The company's product portfolio includes electrolytic capacitors, mica capacitors, AC film capacitors, DC film capacitors and Power Factor Correction Capacitors.
What are the different types of capacitors?
They offer a wide range of capacitors, including ceramic, tantalum, and aluminum electrolytic capacitors. Their products are used in various industries, such as automotive, telecommunications, and consumer electronics. With a market share of approximately 25%, Manufacturer A is one of the top players in the capacitor market.
-
Causes of voltage stabilizer capacitor explosion
The main two reasons that would cause a capacitor to explode is Reverse polarity voltage and Over-voltage (exceeding the voltage as little as 1 – 1. 5 volts could result in an explosion).
FAQs about Causes of voltage stabilizer capacitor explosion
What causes a capacitor to explode?
The next factor that might cause a capacitor to explode is Over voltage. A capacitor is designed to hold a certain amount of capacitance as well as withstand certain amounts of voltages and currents. The voltage of a capacitor is usually displayed on the outside of its packaging.
Can electrolytic capacitors explode?
Electrolytic capacitors do not store very well. Their voltage rating drastically reduces the longer they are stored for as their internal chemistry deteriorates. This could cause a capacitor to explode as it might display a certain voltage, but its actual voltage has reduced.
What causes a capacitor to fail?
Capacitors operated at extreme hot conditions can fail due to excessive temperature. The excessive heat can be due to high ambient temperature, radiated heat from adjacent equipment, or extra losses. 4. Ferroresonance The capacitor banks tend to interact with the source or transformer inductance and produce ferroresonance.
What causes a capacitor to boil?
The general causes are as follows: ①The voltage is too high, causing the capacitor to break down, and the current through the capacitor increases rapidly in an instant; ②The ambient temperature is too high and exceeds the allowable working temperature of the capacitor, causing the electrolyte to boil.
What are some of the failure problems associated with capacitor banks?
Some of the failure problems associated with capacitor banks are already known since they happen often. A few of the failures are traceable to the original source and sometimes that may be difficult to do. In many instances, the final result of a failure may be a catastrophic explosion of the capacitor into pieces or fire.
What happens if a capacitor is not charged?
Electric Charge Explosion: Capacitors with rated voltages must not be charged. Failure to discharge after switch disconnection can result in opposite polarity during reclosure, causing explosive reactions due to residual charges.
-
Bosnia and Herzegovina Super Smart Capacitor
A supercapacitor (SC), also called an ultracapacitor, is a high-capacity, with a value much higher than solid-state capacitors but with lower limits. It bridges the gap between and. It typically stores 10 to 100 times more or than electrolytic capacitors, can accept and deliver charge much faster than batteries, and tolerates many more than rechargeable batteries.
-
Switzerland with an outdoor power bank sitting through customs
Yes, you can ship a power bank internationally, but strict regulations apply due to lithium battery risks. Airlines and couriers require compliant packaging, safety certifications (UN38. Download the official FOCBS. Personal electronic devices and batteries are classified as dangerous goods. This is because if they are damaged they can generate heat, short-circuit and catch fire. If there are two things the Swiss government and public do not joke about, it is road safety and Sunday peace. The Via Sicura (Income-Based Speeding Fines) Switzerland has some of the most unforgiving. Clearing customs in Switzerland can be difficult depending on the goods and animals you are bringing into the country. Customs formalities are required at the border for importing dogs, cats, other. , personal travel goods such as clothes, linen, toiletries, sports equipment, photo, film and video cameras, mobile phones, portable computers, musical instruments and other utensils that travellers residing abroad use and re-export during their stay in Switzerland.
[PDF Version]